Flow Tube is a wireline installed tubing extension used when the tubing landed above the perforated interval in a well. It has a small cross-sectional area and then the well tubing, so it increases flow velocity and allows gas pressure to lift the plunger and fluid column.
Flow Tubes compliment plunger assemblies and are adaptable to any downhole configuration. The results can be significantly better than installing a siphon string and can save thousands of dollars in rig time, packer milling and manipulation time to lower the well tubing.
All PIT Lubricators are heavy duty, with a high grade design built to receive the impacts and frequency of plunger arrivals. Ideal for sour service or low temperature application.
PIT Lubricators come complete with a Bowen cap, lubricator spring(s), separator rod, anvil etc. and are rated to 3 000, 5 000 and 10 000 psi. Dual port configuration is standard, but single port is available upon request.
PIT offers an economical, high performance, pad-style plunger. These plungers implement three spring-loaded pads per section and wear less due to a single piece mandrel.
A very efficient sealing plunger for your well.
A specifically designed platform used to access your wellhead lubricator for plunger lift maitenance and servicing. Protect your operators by supplying a sturdy workplace in all weather conditions with 3 point contact. This eliminates concerns of slipping off of the wellhead or portable devices used for accessing taller wellhead trees.
Our Plunger Arrival System designed to operate in extreme conditions, Cyclops IS detects plunger arrivals from up to 3 feet away. Operates within a temperature range of -40 C to +70 C.
Extensive testing has proven that even a slow-moving, non-ferrous plunger won’t slip by the omniscient eye of Cyclops IS. For utmost accuracy, Cyclops IS allows it’s user to adjust sensitivity levels easily with a built in 7 setting dial. Lower sensitivity to eliminate false detects caused by nearby equipment or tools. Raise sensitivity to increase visibility of a plunger that doesn’t fully enter the lubricator, or to detect well movements caused when a non-ferrous plunger enters the lubricator.
Cyclops IS operates over a wide range of voltages, simplifying inventory management.
The FlowFit Lubricator is a Flow-T Replacement Lubricator built to save time and money in the assembly process. Thanks to our engineer’s revolutionary design, the FlowFit Lubricator can be installed with minimal disruption to the existing tree assembly. The only thing that needs to be removed during assembly is the Flow-T, allowing the Wing Valve to stay in place and potentially saving you $15,000 – $27,000 in costs.
Designed to fall at high speeds, similar to a PaceMaker, but does not require as much flow time at surface to separate a secondary piece. This tool is designed as an intermediate step between PaceMaker candidate wells and Conventional Plunger candidiate wells.
The Rapid Drop Plunger requires no additional equipment on surface to adapt the well for this application and can run in wells with existing subsurface equipment.
These plungers are built with heat treated steel. It is recommended that the Bottom Hole Spring have a spring rate of at least 300lbs per inch to handle dry landings.
The FL3 Automated Fluid Level machine is designed to gather an unprecedented amount of data in the smallest window of time to allow for reservoir pressure calculation, inflow performance, and injection well response to the subject wells.The fluid level data can be viewed from anywhere, allowing pump speed changes to be made with more confidence. This new system is designed to help increase pump life and decrease workover costs in any type of field or well.
The Venturi Plunger is a hollow core plunger with a 1.5″ internal GS grab. A pressure differential is created across the orifice while the plunger is rising causing an accelerated flow regime inside the tool. The accelerated flow regime interacts via the exit of the tool “helping lift.” The upper chamber is at a lower pressure than the lower chamber and the accelerated flow through the orifice creates hydrodynamic lift. The upper chamber acts as a mixing chamber, where gas and liquid are intensely mixed, creating a “traveling gas lift valve” effect.
Exclusive Canadian Distributor partnered with T-RAM
The Skirted Plunger is PIT’s new and improved 4 pad design from flow modeling. It’s increased seal and overlapping design reduces gas and liquid bypass as well as improves pad strength.
Offered in single, dual and triple pad design.
Industry leading solution for liquid loaded horizontal well applications.
The PIT PaceMaker Plunger Lift System utilizes a proven, patented, two-piece plunger design. The large bypass area of the plunger, coupled with high strength materials and other proprietary system components, allows production companies to increase production and recoverable reserves.
Plunger and ball combos are available in titanium, steel and other specialty materials. Fluid and gas rates determine plunger length and weight requirements.
Repetitive fast plungers are a common problem in plunger lift causing production downtime and costly damage to wellhead equipment. A lubricator breach can lead to incident reports, injury, or even death. Sasquatch IS gives you the power to prevent these occurrences by enabling detection of fast plungers long before they cause problems.
The unique design of Sasquatch IS provides additional advantages that no other plunger sensor offers such as the ability to adjust sensitivity and upgrade/troubleshoot Sasquatch IS in the field using ETC Vision software
To keep gas wells from loading by either intermittent or continuous flow gas lift or to lift wells with deviated and horizontal wellbores.
PIT Gas Lift is a complete line of wireline and tubing retrievable gas lift equipment backed by years of experience in manufacturing and service. PIT Gas Lift has the right system for your well and provides exceptional value and flexibility in a full spectrum of applications.
PIT technical experts are equipped with NODAL and advanced well design software capable of providing the most efficient gas lift solution to optimize your wells’ production.
PIT engineering staff can provide training, troubleshooting, and optimization support for any gas lift system.
was last modified: July 11th, 2018 by admin
Premier Integrated Technologies Ltd.
Use this form to find things you need on this site