To keep gas wells from loading by either intermittent or continuous flow gas lift or to lift wells with deviated and horizontal wellbores.
PIT Gas Lift is a complete line of wireline and tubing retrievable gas lift equipment backed by years of experience in manufacturing and service. PIT Gas Lift has the right system for your well and provides exceptional value and flexibility in a full spectrum of applications.
PIT technical experts are equipped with NODAL and advanced well design software capable of providing the most efficient gas lift solution to optimize your wells’ production.
PIT engineering staff can provide training, troubleshooting, and optimization support for any gas lift system.
The PIT Brush Plunger has a flexible brush spirally wound onto a solid mandrel constructed with under cuts, ensuring de-scaling of the tubing. Brush plungers are used for sand, coal fines and tubing irregularities.
PIT Brush Plungers are built with durable alloy steel; brush element is a stiff, heat resistant, durable nylon material.
The Skirted Plunger is PIT’s new and improved 4 pad design from flow modeling. It’s increased seal and overlapping design reduces gas and liquid bypass as well as improves pad strength.
Offered in single, dual and triple pad design.
A wax cutting plunger with a honeycomb-patterned design, the WaxBroach is meant to slice through well contaminants with ease. Utilizing a unique design, the WaxBroach is capable of removing contaminants while traveling both up and down the well. This new gouging pattern is capable of handling even the toughest contaminants.
A specifically designed platform used to access your wellhead lubricator for plunger lift maitenance and servicing. Protect your operators by supplying a sturdy workplace in all weather conditions with 3 point contact. This eliminates concerns of slipping off of the wellhead or portable devices used for accessing taller wellhead trees.
Flow Tube is a wireline installed tubing extension used when the tubing landed above the perforated interval in a well. It has a small cross-sectional area and then the well tubing, so it increases flow velocity and allows gas pressure to lift the plunger and fluid column.
Flow Tubes compliment plunger assemblies and are adaptable to any downhole configuration. The results can be significantly better than installing a siphon string and can save thousands of dollars in rig time, packer milling and manipulation time to lower the well tubing.
Our Plunger Arrival System designed to operate in extreme conditions, Cyclops IS detects plunger arrivals from up to 3 feet away. Operates within a temperature range of -40 C to +70 C.
Extensive testing has proven that even a slow-moving, non-ferrous plunger won’t slip by the omniscient eye of Cyclops IS. For utmost accuracy, Cyclops IS allows it’s user to adjust sensitivity levels easily with a built in 7 setting dial. Lower sensitivity to eliminate false detects caused by nearby equipment or tools. Raise sensitivity to increase visibility of a plunger that doesn’t fully enter the lubricator, or to detect well movements caused when a non-ferrous plunger enters the lubricator.
Cyclops IS operates over a wide range of voltages, simplifying inventory management.
The FL3 Automated Fluid Level machine is designed to gather an unprecedented amount of data in the smallest window of time to allow for reservoir pressure calculation, inflow performance, and injection well response to the subject wells.The fluid level data can be viewed from anywhere, allowing pump speed changes to be made with more confidence. This new system is designed to help increase pump life and decrease workover costs in any type of field or well.
The PIT Multi-Stage Plunger system increases gas and liquids production by staging the well. This is done by moving part of your energy source under each stage. By staging the well, the fluid load is lifted to a shallower depth.
The FlowFit Lubricator is a Flow-T Replacement Lubricator built to save time and money in the assembly process. Thanks to our engineer’s revolutionary design, the FlowFit Lubricator can be installed with minimal disruption to the existing tree assembly. The only thing that needs to be removed during assembly is the Flow-T, allowing the Wing Valve to stay in place and potentially saving you $15,000 – $27,000 in costs.
PIT offers an economical, high performance, pad-style plunger. These plungers implement three spring-loaded pads per section and wear less due to a single piece mandrel.
A very efficient sealing plunger for your well.
All PIT Lubricators are heavy duty, with a high grade design built to receive the impacts and frequency of plunger arrivals. Ideal for sour service or low temperature application.
PIT Lubricators come complete with a Bowen cap, lubricator spring(s), separator rod, anvil etc. and are rated to 3 000, 5 000 and 10 000 psi. Dual port configuration is standard, but single port is available upon request.
was last modified: July 11th, 2018 by admin
Premier Integrated Technologies Ltd.
Use this form to find things you need on this site