Showing all 11 results
A wax cutting plunger with a honeycomb-patterned design, the WaxBroach is meant to slice through well contaminants with ease. Utilizing a unique design, the WaxBroach is capable of removing contaminants while traveling both up and down the well. This new gouging pattern is capable of handling even the toughest contaminants.
Invented and patented by Premier Integrated Technologies, the MagLock Plunger puts conventional seal methods to shame. The MagLock plunger is a shift valve style plunger. While regular plungers use Snap Rings, D-Tent Bulbs, or springs to hold the shift valve closed, the MagLock Plunger utilizes powerful earth magnets to form the ultimate seal.
The PIT Brush Plunger has a flexible brush spirally wound onto a solid mandrel constructed with under cuts, ensuring de-scaling of the tubing. Brush plungers are used for sand, coal fines and tubing irregularities. PIT Brush Plungers are built with durable alloy steel; brush element is a stiff, heat resistant, durable nylon material.
PIT Solid Ring/Spiral plungers are made out of high performance alloys to allow for economical, low maitenance equipment. They can have solid or hollow centers and are best suited in wells with associated paraffin or scale production. 4140 steel or 17-4 stainless option.
Industry leading solution for liquid loaded horizontal well applications. The PIT PaceMaker Plunger Lift System utilizes a proven, patented, two-piece plunger design. The large bypass area of the plunger, coupled with high strength materials and other proprietary system components, allows production companies to increase production and recoverable reserves. Plunger and ball combos are available in titanium, steel and other specialty materials. Fluid and gas rates determine plunger length and weight requirements.
Designed to fall at high speeds, similar to a PaceMaker, but does not require as much flow time at surface to separate a secondary piece. This tool is designed as an intermediate step between PaceMaker candidate wells and Conventional Plunger candidiate wells. The Rapid Drop Plunger requires no additional equipment on surface to adapt the well for this application and can run in wells with existing subsurface equipment. These plungers are built with heat treated steel. It is recommended that the Bottom Hole Spring have a spring rate of at least 300lbs per inch to handle dry landings.
The Venturi Plunger is a hollow core plunger with a 1.5″ internal GS grab. A pressure differential is created across the orifice while the plunger is rising causing an accelerated flow regime inside the tool. The accelerated flow regime interacts via the exit of the tool “helping lift.” The upper chamber is at a lower pressure than the lower chamber and the accelerated flow through the orifice creates hydrodynamic lift. The upper chamber acts as a mixing chamber, where gas and liquid are intensely mixed, creating a “traveling gas lift valve” effect. Exclusive Canadian Distributor partnered with T-RAM