Description
Specifications
Product Description
Features
- Lower torque electric actuator system to replace pneumatic actuators for existing control valves, this eliminates the need for major piping changes when converting existing applications to electric operation as well as utilizes a valve that is better suited for on/off operation
- Tested on Kimray 2200 and 2150 series control valves 2200
- 200 inch pound electric actuator current draw with 0-100 PSI differential was 350 MA current draw with 800 PSI differential was 350 MA cycle time for 30 seconds Kimray 2150
Unit includes valve position indicator, and enclosed case electric actuator is NEMA 7 rated available in both 12 and 24V applications
Specifications:
-Lower torque electric actuator system to replace pneumatic actuators for existing control valves this eliminates the need for major piping changes when converting existing applications to electric operation as well as utilizes a valve that is better suited for on/off operation.
-Unit has been tested on Kimray 2200 and 2150 series control valves 2200
-200 inch pound electric actuator current draw with 0-100 PSI differential was 350 MA current draw with 800 PSI differential was 350 MA cycle time for 30 seconds Kimray 2150
-Unit includes valve position indicator, and enclosed case electric actuator is NEMA 7 rated available in both 12 and 24V applications
Related Products
Quick View
Gas Lift
To keep gas wells from loading by either intermittent or continuous flow gas lift or to lift wells with deviated and horizontal wellbores.
PIT Gas Lift is a complete line of wireline and tubing retrievable gas lift equipment backed by years of experience in manufacturing and service. PIT Gas Lift has the right system for your well and provides exceptional value and flexibility in a full spectrum of applications.
PIT technical experts are equipped with NODAL and advanced well design software capable of providing the most efficient gas lift solution to optimize your wells' production.
PIT engineering staff can provide training, troubleshooting, and optimization support for any gas lift system.
Quick View
The Rapid Drop Plunger
Designed to fall at high speeds, similar to a PaceMaker, but does not require as much flow time at surface to separate a secondary piece. This tool is designed as an intermediate step between PaceMaker candidate wells and Conventional Plunger candidiate wells.
The Rapid Drop Plunger requires no additional equipment on surface to adapt the well for this application and can run in wells with existing subsurface equipment.
These plungers are built with heat treated steel. It is recommended that the Bottom Hole Spring have a spring rate of at least 300lbs per inch to handle dry landings.
Quick View
PaceMaker Plunger Lift System
Industry leading solution for liquid loaded horizontal well applications.
The PIT PaceMaker Plunger Lift System utilizes a proven, patented, two-piece plunger design. The large bypass area of the plunger, coupled with high strength materials and other proprietary system components, allows production companies to increase production and recoverable reserves.
Plunger and ball combos are available in titanium, steel and other specialty materials. Fluid and gas rates determine plunger length and weight requirements.